Out of Stock
Bowden Teflon PTFE Tube (2mmx4mm, Per Meter)

These PTFE tubes are often used in 3D printers to provide a non-stick guide filament without the tube melting or filament clogging.

Material: Teflon
Color: white/black/red/blue/orange/transparent
Temperature Range: -180 +260C
Density: 2.10 2.30g/am3
Tensile Strength: >18Mpa
Break Eongation: 230%
 

Teflon tube size:(ID=inner diameter,OD=outer diameter)

ID2mm OD4mm = inner diameter 2mm,outer diameter 4mm

 

  • N/A

More from this Category

RAMPS LCD Control Panel (12864 LCD)

RAMPS LCD Control Panel (12864 LCD)

R 492.80 View
3D Printer Build Surface Heat Bed Sticker (214mmx214mm, Mk3)

3D Printer Build Surface Heat Bed Sticker (214mmx214mm, Mk3)

R 72.80 View
RAMPS 1.4 ARDUINO SHIELD

RAMPS 1.4 ARDUINO SHIELD

R 201.60 View
Out of Stock
E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Direct Drive)

E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Direct Drive)

R 229.60 View
GT2 Timing Belt & GT Pulley Set (16Teeth, 5mm Bore, 5Meters)

GT2 Timing Belt & GT Pulley Set (16Teeth, 5mm Bore, 5Meters)

R 504.00 View
BigTreeTech SKR 1.4

BigTreeTech SKR 1.4

R 1316.00 View
Out of Stock
E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Bowden)

E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Bowden)

R 144.20 View
E3D V6 1.75MM HEAT BREAK

E3D V6 1.75MM HEAT BREAK

R 16.80 View
E3D V6 Direct Drive Extruder Radiator Cooling Tower (1.75mm, M7)

E3D V6 Direct Drive Extruder Radiator Cooling Tower (1.75mm, M7)

R 37.80 View
E3D V5 HEATER BLOCK

E3D V5 HEATER BLOCK

R 22.40 View