This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.
Warning: The connector is not waterproof, please be careful not to put the connector directly in water.
Applications:
Simple rain detector
Cheap steam level switch
Touch sensor based on humidity
Power supply: 3.3v or 5v
Output voltage signal: 0~4.5v(@5v) or 0~3.0v(@3.3v)
Pin definition:
Analog output (Blue wire)
GND (Black wire)
Power (Red wire)
Size: 30x20x6mm
- N/A
More from this Category
LM393 Light Detection Sensor Module (4-pin LM393 LDR Digital & Analog)
R 45.66
View
TCRT5000 Infrared Line Tracking & Tracing Sensor Module
R 36.07
View
ADXL345 3-Axis Accelerometer Module
R 122.98
View
Speed Sensor/Tacho Sensor (Slot-Type Optocoupler)
R 42.17
View
IR Infrared Obstacle Avoidance Sensor Module
R 39.63
View
Snow & Rain Detection Sensor Module
R 54.57
View
Temperature Sensor Module (KY-001 3pin DS18B20)
R 59.63
View
Soil Moisture (Humidity) Sensor Module
R 41.00
View
Reed Sensor Module (MagSwitch)
R 18.71
View