This inlet adapter allows you to draw power from the mains inlet at 230VAC
Voltage & Current : 10A, 250V AC
Use only with a 250V fuse.
* Hole in Top Face Diameter : 0.42cm / 0.16"
* Hole Center Distance : 3.9cm / 1.5"
* Bottom Size : 4.7 x 2.7cm / 1.9" x 1.1"(L*W)
* Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(L*W*H)
* Weight : 24g
- N/A
-
Electronics 119: Safety, Limits & Fault Handling in Motion Systems
A systems-engineering guide to keeping motion systems safe: limit switches, soft limits, emergency stops, fault detection, and why safety must be designed in from the first schematic — not patched in after something breaks.
-
Arduino Tutorial: KY-023 Joystick Module (XY + Push Button)
This tutorial teaches you how to use the KY-023 Joystick Module with Arduino projects. You will learn the electrical behavior (two analog axes + one digital switch), correct wiring, stable reading, calibration (center + range), deadzone filtering, and how to drive real outputs like servos, motors, and menus.
More from this Category
Mercury Switch (5mm Diameter, F5 High)
R 12.89
View
1-Key RED Membrane Button Switch
R 40.66
View
Hinged Roller Limit Switch ( 1A, 125VAc)
R 24.60
View
On/Off Momentary Push Button (Panel Mount with Light Indicator; 220V)
R 101.64
View
Liquid Level Float Switch - Foam Float Type
R 122.98
View
Push Button Rotary Encoder Module with Potentiometer Knob
R 90.19
View
2-Axis Ball Joyride Controller (JH-D202X-R2/R4 5K Electric Joystick )
R 557.54
View
RAMPS 1.4 Mechanical Endstop/Limit Switch Module
R 41.00
View