Out of Stock
100K NTC 3950 Thermistorwith 1M cable (XH2.54 Connector)

This 100K Ohm, NTC 3950 with 1M cable thermistor is often used with hot ends and heated beds on 3D printers.

Resistance Accuracy: ±1%，±2%, ±3%

B Accuracy: ±1%

Temperature Range: -40β„ƒο½ž+300℃

Max Rated Power: 45mW

Resistance Temperature Coefficient: -2～-5%/℃

Suggested Parameters: R25℃=100K   B25/50=3950K(±1%)

  • N/A

  • Arduino Tutorial: TEC1-12710 Peltier (Thermoelectric Cooler/Heater) — Power, Control, Wiring, Projects
    This tutorial is a comprehensive, maker-focused guide to using a TEC1-12710 thermoelectric module (Peltier plate) in Arduino projects. You will learn how the device works, how to size the power system, how to mount it correctly with heat sinks, how to reverse polarity for heating vs cooling, and how to build reliable temperature-control projects (cooling boxes, camera sensor cooling, small incubators, lab plates, etc.).

More from this Category

K-Type Thermocouple High Temperature Probe (3mm Diameter 0°C-800°C, WRNK-191; 200mm * 1500mm)

K-Type Thermocouple High Temperature Probe (3mm Diameter 0°C-800°C, WRNK-191; 200mm * 1500mm)

R 315.67 View
THERMOCOUPLE K TYPE SENSOR PROBE (1 METER)

THERMOCOUPLE K TYPE SENSOR PROBE (1 METER)

R 41.00 View
Out of Stock
Heating Element, 80mm, 125 W, 220 V ac

Heating Element, 80mm, 125 W, 220 V ac

R 196.00 View