Out of Stock
E3D V5 1.75MM HEAT BREAK

The V5 heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle.

 

  • Material Composition

– Stainless Steel                                                        
  • Top End Thread

– M6
  • Bottom End Thread

– M6
  • Inner Hole Diameter

– 2mm (±0.05)
  • Filament Diameter Compatibility

– 1.75mm

  • N/A

More from this Category

Out of Stock
Bowden Teflon PTFE Tube (2mmx4mm, Per Meter)

Bowden Teflon PTFE Tube (2mmx4mm, Per Meter)

R 28.00 View
RAMPS LCD Control Panel (12864 LCD)

RAMPS LCD Control Panel (12864 LCD)

R 492.80 View
3D Printer Build Surface Heat Bed Sticker (214mmx214mm, Mk3)

3D Printer Build Surface Heat Bed Sticker (214mmx214mm, Mk3)

R 72.80 View
RAMPS 1.4 ARDUINO SHIELD

RAMPS 1.4 ARDUINO SHIELD

R 201.60 View
Out of Stock
E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Direct Drive)

E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Direct Drive)

R 229.60 View
GT2 Timing Belt & GT Pulley Set (16Teeth, 5mm Bore, 5Meters)

GT2 Timing Belt & GT Pulley Set (16Teeth, 5mm Bore, 5Meters)

R 504.00 View
BigTreeTech SKR 1.4

BigTreeTech SKR 1.4

R 1316.00 View
Out of Stock
E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Bowden)

E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Bowden)

R 144.20 View
E3D V6 1.75MM HEAT BREAK

E3D V6 1.75MM HEAT BREAK

R 16.80 View
E3D V6 Direct Drive Extruder Radiator Cooling Tower (1.75mm, M7)

E3D V6 Direct Drive Extruder Radiator Cooling Tower (1.75mm, M7)

R 37.80 View