A DC-DC 10-32V to 12-35V 150W step-up booster is a type of power converter that is designed to increase the voltage of a DC power source. It operates by taking in a low voltage DC input and producing a higher voltage DC output. The input voltage range of the booster is typically 10-32V, and the output range is 12-35V. It is rated for a maximum power output of 150W. The booster is often used to power electronic devices that require a higher voltage than the input source can provide, or to provide a voltage boost to a system to increase its power capabilities. It is important to ensure that the output voltage of the booster is compatible with the voltage requirements of the device being powered.
DIY an adjustable on-board power supply, you just input DC 12V, then you can get output DC 12V-35V (adjustable), But the output voltage can not below the input voltage.
DIY a booster charger.
Provide power for your electronic equipment.
Use Solar battery charging for electric accumulator.
nput voltage: DC 10V-32V.
Output voltage: DC12V-35V(adjustable).
Output current: 10A (MAX).
Input current: 16A (MAX) (more than 10A please strengthen heatsink).
Output power: natural cooling 100W (MAX), strengthening cooling 150W (MAX) real power.
Conversion efficiency: 94% (when Output 19V 2.5A Input 16V, Reference).
Output ripple: 2% (MAX).
Working temperature: industrial (- 40 ° c to +85 °c) ( environmental temperature, more than 40 degrees, please reduce power to use, or - enhance cooling).
Full-Load temperature: 45 degrees.
No-load current: 25mA typical.
Voltage regulation: ± 0.5%.
Load regulation: ± 0.5%.
Dynamic response speed: 200uS 5%.
Short circuit protection: No (Please installs the fuse or protection circuit at input parts).
Input Reverse protection: No (please comply with a reverse protection or connect a diode at input parts.).
Dimension: 65mm x 35mm x 23.5mm.
- N/A
More from this Category
20KV High Voltage Generator ( DC 3.6-6V, 1.5A, Pulse Arc Igniter, Step Up Boost Module Coil Transformer)
LM2596 Voltage Regulator Module (Buck Adjustable Step Down, Vin 3.5V - 40V, Vout 1.5V - 35V)
MT3608 DC-DC Boost Module 2A (Step Up Power Supply)
LM1117/AMS1117 3.3V DC-DC Step down Power Supply Module (4.5-7 VIn, 3.3 VOut)
15KV High Voltage Generator (Arc Ignition Inverter, Step Up Boost Coil)
DC-DC Buck Converter Step Down Module (300W,10V-40V, 20A Constant Current )
AC-DC 5V 800mA 110V/220V to DC 5V Power Supply Module (Buck Converter Step Down Board Transformer)
DC to DC 250W Constant Current Boost Step Up Module Power Supply (8.5-48V Input 10-50V Output)
