A CNC (Computer Numerical Control) controller is a device that is used to control the motion of machines, such as lathes, mills, and 3D printers. The TB6560 stepper motor driver is a type of electronic driver that is used to control the speed and torque of a stepper motor. It is designed to be used with the Mach3 software and has a maximum current output of 3.0 amps. It is a single-axis driver, meaning that it can control one stepper motor at a time. Stepper motors are widely used in CNC systems because they can be accurately controlled and can produce high torque at low speeds.
Use this stepper motor driver to control stepper motors at 3A! This driver is perfect for DIY CNC machines, requiring high power & performance.
- Using the TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance.
- For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor.
- Automatic half current function.
- 6N137 high-speed optical coupling, guarantee high speed without losing step.
Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)
Rated maximum output: ± 3A, peak 3.5A
Working voltage: DC 10V-35V
Recommended to use a switching power supply: DC24V power supply
Subdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions.
- N/A
-
Electronics 113: Motor Drivers & H-Bridges Explained
A clear, engineering-focused guide to driving DC motors, stepper motors, and actuators safely: why microcontroller pins are never enough, how H-bridges actually work, and how to choose the correct motor driver without smoke, resets, or mysterious failures.
-
Electronics 114: Stepper Motors & Microstepping Explained
A practical engineering guide to stepper motors: how they really work, why current control matters more than voltage, what microstepping actually does, and how to set up reliable motion systems for 3D printers, CNC machines, and precision positioning projects.
-
Electronics 115: Servo Motors & Closed-Loop Control
A practical engineering guide to servo motors and closed-loop systems: how servos differ from steppers and DC motors, how feedback works, and how to design precise, stable motion systems without oscillation, jitter, or burned gearboxes.
More from this Category
A4988 STEPPER MOTOR DRIVER (RAMPS)
High-Power Motor H-Bridge Driver (43A, BTS7960B, IBT_2)
Dual DC Motor Driver Module (1.5A, 2-Way, MX1508 ,PWM Speed Control; Dual H-Bridge, MX1616)
L298N IC (H-Bridge Motor Driver IC, 46V, 4A ,15-Pin)
High-Power Pulse Width Modulator PWM Waterproof DC Motor Speed Controller (10-60V 10A)
