The ENC28J60 is a popular Ethernet LAN Network Port Module. It is a standalone device that allows a microcontroller to connect to an Ethernet network. It provides a simple interface between the microcontroller and the Ethernet, allowing the microcontroller to communicate over the network using standard TCP/IP protocols. The module provides a 10BASE-T Ethernet interface, and supports hardware-based checksum calculations and automatic padding of short packets, which helps to minimize processing overhead for the microcontroller.
ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. This Ethernet LAN module connects directly to most microcontrollers.
Add networking capabilities to your project with this LAN/Ethernet module for Arduino. This module is based on the ENC28J60 chip and is quick to get up and running.
- Ethernet LAN Module for Arduino/AVR/LPC/STM3
- ENC28J60 Ethernet chips
- Can be easily mounted with the MCU
- Network Interface: HR911105A
- Supply Voltage: 3.3 V (5V Tolerant DIO)
- 25Mhz crystal oscillator
- Size (L x W x H): Approx. 2.3 x 1.3 x 0.7 inch / 58 x 34 x 17 mm
| PINOUT | |
|---|---|
| PIN | DESCRIPTION |
| 1 | CLK OUT |
| 2 | INT |
| 3 | WOL |
| 4 | SO |
| 5 | SI |
| 6 | SCK |
| 7 | CS |
| 8 | RES |
| 9 | +3.3V |
| 10 | GND |
Datasheet can be found here: http://ww1.microchip.com/downloads/en/devicedoc/39662c.pdf
- N/A
More from this Category
2.4GHz Long Distance Wireless Transceiver Module (NRF24L01, 1 Kilometer Range, 2Mb per second)
HC05 Bluetooth Module (HC05 , 3.3V, 150mA)
LAN Ethernet Network Module (W5100)
NodeMCU Lua WIFI ESP8266 Microcontroller
ESP32-CAM WiFi + bluetooth Camera Module Development
GPRS GSM Module A9
2.4GHz Wireless Transceiver SMD Module (NRF24L01, onboard antenna, SMD pins)
Aluminium Shell USB 2.0 to TTL UART 5PIN Module Serial Converter CP2102
