-
Direct plug board, NO soldering needed.
-
Five momentary push buttons (4+ joystick select button, just like the playstation 3 analog stick push button)
-
two-axis thumb joystick
-
specification: The push buttons are connected to Arduino digital pins 2-6; the related pin will be low when a certain button is pressed. Joystick
-
Y-Axis movement will produce a proportional analog voltage on analog pin 0, while, Joystick X-Axis movement will produce a analog signal on analog pin 1.
With our Nokia 5110 LCD interface, it is very easy to create game user interfaces and develop games directly using the Arduino.
Tutorial Video: https://www.youtube.com/watch?v=dkgUP_tKqGo&ab_channel=RCTractorGuy
Onboard switches can switch between 3.3V and 5V, can use this model for other 3.3V microcontroller platforms, such as STM32.
Supports Arduino input expansion.
Supports I2C, RF nRF24L01 and Bluetooth modules connectivity (not included)
• Added Nokia 5110 LCD interface, which is very convenient for game development.
• The JoyStick Shield has 1 PS2 with button cross rocker, 4 round buttons and 2 small buttons. An input extension for the joystick and buttons is provided.
• The onboard switch can be switched between 3.3V and 5V.
• This module can be used on other 3.3V microcontroller platforms such as STM32.
Specification:
• Size: 8.7 cm x 5.4 cm x 1.8 cm
• Weight: 35 g
- N/A
More from this Category
JoyStick Module KY-023 (Arduino)
TTP229 16-Key Digital Capacitive Switch Touch Sensor Module
4x4 Matrix (16 Key) Membrane Keypad
Capacitive Touch Switch Sensor Module (TTP223B)
4x3 Matrix (12 Key) Membrane Keypad
Five Direction (5D) Game Joystick Button Module
20 Key Membrane Matrix Array Keypad 4x5
All-in-One TM1638 8-Digit LED Display, 16-Key Keyboard, 8Bit (3 Wire) Module
