NRF24L01 2.4GHz Wireless Transceiver Module

The NRF24L01 is a 2.4 GHz wireless transceiver module that is used for communication between devices. It is a low-cost, low-power module that is designed for short-range wireless communication and can be used in a variety of applications, including home automation, industrial automation, and other applications that require wireless communication. The NRF24L01 module is based on the NRF24L01+ radio transceiver IC (integrated circuit) and includes an on-board antenna as well as a range of other features, such as a built-in data rate controller, an on-board voltage regulator, and more. It can be easily integrated into a variety of projects and systems using a microcontroller or other device.

 
 
 
This low-power 2Mbps 2.4Hgz Transceiver will allow you to communicate with other Arduino's and even Routers/Computers directly.
 
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
125 Channels, Multi-point communication and frequency hopping to meet the communication needs
Built-in  hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Available software to set the address,  only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
Built-in voltage regulator
Standard DIP Pitch Interface for embedded applications
size: 34mm X 14mm

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
125 Channels, Multi-point communication and frequency hopping to meet the communication needs
Built-in  hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Available software to set the address,  only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
Built-in voltage regulator
Standard DIP Pitch Interface for embedded applications
size: 34mm X 14mm

  • N/A

More from this Category

H201 RF Receiver Module with RF Transmitter Module (433MHZ)

H201 RF Receiver Module with RF Transmitter Module (433MHZ)

R 79.37 View
Out of Stock
NEO-6M GPS Module

NEO-6M GPS Module

R 207.20 View
Infrared (IR) Wireless Remote Control Module HX1838

Infrared (IR) Wireless Remote Control Module HX1838

R 49.61 View
2.4GHz Wireless Transceiver Module (NRF24L01, onboard antenna)

2.4GHz Wireless Transceiver Module (NRF24L01, onboard antenna)

R 57.39 View
UART 125Khz EM4100 RFID Key Card Module (RDM6300)

UART 125Khz EM4100 RFID Key Card Module (RDM6300)

R 207.44 View
Serial Wireless WIFI Module (ESP8266 )

Serial Wireless WIFI Module (ESP8266 )

R 73.92 View
Out of Stock
CC1101 RF1101 Wireless Transceiver Module with SMA Antenna

CC1101 RF1101 Wireless Transceiver Module with SMA Antenna

R 324.80 View
433Mhz Superheterodyne Wireless Receiver Module (315M RXB6)

433Mhz Superheterodyne Wireless Receiver Module (315M RXB6)

R 180.38 View
Out of Stock
GPRS with GSM and GPS Shield A7 (SMS, Voice Calls & GPS Location)

GPRS with GSM and GPS Shield A7 (SMS, Voice Calls & GPS Location)

R 523.60 View
125KHz RFID Reader Module (5V, UART 3Pin, EM4100)

125KHz RFID Reader Module (5V, UART 3Pin, EM4100)

R 188.58 View