Out of Stock

Serial Micro-SD Card Module

Reference: #265

R 28.00

Out of Stock

A Serial Micro-SD Card Module is a small, easy-to-use device that allows the user to add removable storage to projects and development boards. It enables users to store and manipulate data more easily. The module supports standard SD, SDHC, and Micro-SD cards, and utilizes a serial interface for data transfer. It is compatible with a variety of development boards and microcontrollers, including Arduino, Raspberry Pi, and ESP32. The module can be used for data logging, file storage, and other applications.

Support Micro SD Card with your Ardunio and non-Ardunio projects with this Micro SDHC card (high-speed card)
The level conversion circuit board that can interface level is 5V or 3.3V
Communication interface is a standard SPI interface
With mounting holes of 4 x M2 screws positioning holes of diameter of 2.2mm to allow for easy to installation and positioning and allow for inter-module combinations.

1. Support Micro SD Card, Micro SDHC card (high-speed card)
2. The level conversion circuit board that can interface level is 5V or 3.3V
3. Communication interface is a standard SPI interface
4. Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
5. VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;
6. 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;
7. Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
8. Micro SD card connector: yes since the bomb deck for easy card insertion and removal.
9. mounting holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination.

1. Support Micro SD Card, Micro SDHC card (high-speed card)
2. The level conversion circuit board that can interface level is 5V or 3.3V
3. Communication interface is a standard SPI interface
4. Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
5. VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;
6. 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;
7. Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
8. Micro SD card connector: yes since the bomb deck for easy card insertion and removal.
9. mounting holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination.

Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;

Arduino Automated Plant Water Project
A simple but practical Arduino project to automatically water your plants, showing the usage of a 7-Segment Display, a Soild Moisture Sensor, a Temperature Sensor and a Relay.
Arduino Introduction
Introducing you to the awesome Arduino!
Simple Arduino RC Car/Robot
A guide to construct your own Arduino-based 2 Wheel-Drive Robot
Arduino F.A.Q
Arduino Frequently Asked Questions & Answers
Arduino Tutorial: Arduino Nano V3 (CH340) - Setup, Drivers, Pinout, Power, and Project Patterns
This tutorial is a detailed, practical guide to using the Arduino Nano V3 (CH340) in real projects. It covers: driver and IDE setup (including the common “Old Bootloader” fix), pin mapping and interfaces (UART/I2C/SPI), safe power options (USB vs VIN), and proven patterns for sensors, motors, displays, and compact breadboard builds.
Arduino Tutorial: Arduino UNO R3 — Setup, Pinout, Power, Interfaces, and Project Patterns
This tutorial is a practical, detailed guide to using the Arduino UNO R3 in Arduino projects. It covers first-time setup in the Arduino IDE, safe powering options, the pinout (digital, analog, PWM), communication interfaces (I2C, SPI, UART), best-practice wiring, and proven project patterns for sensors, relays, motors, and displays.
Arduino Tutorial: Arduino Mega 2560 R3 — Big Projects, Many Pins, 4 Serial Ports
This is a comprehensive, maker-focused guide to the Arduino Mega 2560 R3. It explains when to choose a Mega over an Uno/Nano, how to wire and power it safely, how to use its huge I/O count, and how to take advantage of the Mega’s biggest differentiator: 4 hardware serial ports for multi-device projects.