The CD4049BE devices are inverting hex buffers, and feature logic-level conversion using only one supply voltage(VCC). The input-signal high level(VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads.
The CD4049UB and CD4050B devices are inverting and noninverting hex buffers, and feature logic-level conversion using only one supply voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logiclevel conversions. These devices are intended for use as CMOS to DTL or TTL converters and can drive directly two DTL or TTL loads. (VCC = 5 V, VOL ≤ 0.4 V, and IOL ≥ 3.3 mA.)
Dip-16 Package
High Sink Current for Driving 2 TTL Loads
High-To-Low Level Logic Conversion
Maximum Input Current of 1uA at 18V Over Full Package Temperature Range
5V, 10V and 15V Parametric Ratings
CD4049UB Inverting
• CD4050B Noninverting
• High Sink Current for Driving 2 TTL Loads
• High-to-Low Level Logic Conversion
• 100% Tested for Quiescent Current at 20 V
• Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range; 100 nA at 18 V and 25°C
• 5-V, 10-V, and 15-V Parametric Ratings
- Length: 20.00 mm
- Width: 5.00 mm
- Height: 5.00 mm
More from this Category
Atmel ATmega328P-PU Microcontroller
NE555P (555 Timer)
CD4028BE (BCD-to-Decimal or Binary-to-Octal Decoder)
CD4013BE (Dual D-type flip-flop IC DIP-14)
CD4052BE DIP-16 IC (CMOS Single 8-Channel Analog Multiplexer/Demultiplexer With Logic-Level Conversion)
CD4022B (CMOS Octal Counter with 8 Decoded Outputs)
AT24C04N (DIP-8 EEPROM (512x8) 4K)
CD4027BE (Dual JK Flip-Flop)
CD4066BE (Analogue Switch, Quad Channel, SPST, 4 Channels, 240 ohm, 3V to 18V)
